Miche cassette

A place for Campy fans around the world to share information online.

Re: Miche cassette

Postby Mick F » Sat Jan 08, 2011 5:29 am

Hi Martin,
I wanted to keep the 29t big cog, but have the cassette re-done so I could have a 12t little sprocket.

13-29 10sp Campag is:
13, 14, 15, 16, 17, 19, 21, 23, 26, 29

I wanted the similar tooth differences - but with a 12t
So I bought:
12, 13, 14, 15, 16, 18, 20, 22, 25, 29

In opinion, this is a FAR better setup than the Campag offering.

Mick.
User avatar
Mick F
 
Posts: 115
Joined: Wed May 06, 2009 1:23 pm
Location: Tamar Valley, Cornwall

Re: Miche cassette

Postby roadrider » Sat Jan 08, 2011 5:48 pm

Mick, are you using a long cage derailleur with that combination?
Jeff
roadrider
 
Posts: 9
Joined: Mon Dec 27, 2010 5:14 am
Location: NC

Re: Miche cassette

Postby Mick F » Sat Jan 08, 2011 11:09 pm

No.
Medium Chorus.
I have a Chorus Triple chainset 30/42/53 as well.

The capacity of my gearing is (29-12)+(53-30)=40

Mick.
User avatar
Mick F
 
Posts: 115
Joined: Wed May 06, 2009 1:23 pm
Location: Tamar Valley, Cornwall

Re: Miche cassette

Postby MartinC » Mon Jan 10, 2011 8:42 am

I guess the standard Miche 12-29 cassette must be 12,13,14,15,17,19,21,23,26,29 rather than the ratios you wanted. Did it cost much more to buy the sprockets individually?
MartinC
 
Posts: 23
Joined: Tue Jan 04, 2011 9:11 am
Location: UK, Cheltenham

Re: Miche cassette

Postby Mick F » Mon Jan 10, 2011 11:45 pm

YES!
Rather too much, but it will last years and I'm happy.
£104 - not much if say it quickly.

Read the threads about it.
viewtopic.php?f=4&t=2091
http://forum.ctc.org.uk/viewtopic.php?f=5&t=41029

Mick.
User avatar
Mick F
 
Posts: 115
Joined: Wed May 06, 2009 1:23 pm
Location: Tamar Valley, Cornwall

Re: Miche cassette

Postby MartinC » Fri Jan 14, 2011 6:27 am

Mick, where did you get the custom cassette? I've been thinking - I could use a ShimaNO splined Campag spaced 9 speed cassette for my touring bike.
MartinC
 
Posts: 23
Joined: Tue Jan 04, 2011 9:11 am
Location: UK, Cheltenham

Re: Miche cassette

Postby Mick F » Fri Jan 14, 2011 8:14 am

Hi Martin,
I was asking about Custom Cassettes on here and on the CTC Forum as I wanted something specific, as you can tell from the links. (above)

It was Jazclrint on this forum who sorted me out. He's in the US, so I sent the money via PayPal.
Jazclrint: memberlist.php?mode=viewprofile&u=158
We swapped a PM or two and the job was done! Send him a PM and see what he says.

Regards,
Mick.
User avatar
Mick F
 
Posts: 115
Joined: Wed May 06, 2009 1:23 pm
Location: Tamar Valley, Cornwall

Re: Miche cassette

Postby jannypan » Thu Mar 31, 2011 12:22 am

The coating seems to be better than my previous cassette - 2006 Centaur - and is definitely shinier. The Centaur was dull and boring. Even my old Mirage cassettes were nicer looking than the Centaur.
jannypan
 
Posts: 3
Joined: Thu Mar 31, 2011 12:19 am

Previous

Return to General Campy Stuff

Who is online

Users browsing this forum: No registered users and 0 guests